Inspect locating pins of defroster nozzle and add 3M Squeak Reduction Tape (P/N 3M
06356) to locating pins as shown in Figure 2. 2. Add 3M Window Weld (P/N 3M 08611) to each of the four defroster nozzle assembly mounting points on the body. Noise Coming from Broken Dash Mounting Clips 1. Remove broken clips and pins (see Figure 3). 2. Install new clips and pins. 3. Apply 3M Squeak Reduction Tape (P/N 3M 06356) to pins (refer to the Tacoma Repair Manual, page BO-55, for applicable year)
